Printed Circuit Card Cloning Component Model

In order to proceed the circuit simulation and the component model of Printed Circuit Card Cloning must be built in the first hand, refers to other electronic components supported by circuit simulation program, in the simulation program must have corresponding mathematic model to depict them, and use the computational formula which can be run and operated.

In a component model which can be described an ideal one, it can not only reflect the component electrical features correctly, but also fit for the value solution from the computers from printed circuit card cloning. General speaking, the higher accuracy of the component model, the more complicate the model itself, and consequently the required model parameters will become more.

In this way the internal flash taken in the process of calculation, and the calculation time length will increase correspondingly. And inside the integrated circuit is normally include great amount of components, even a small fraction of the rising components model can increase the calculation time in several times when printed circuit card cloning. And in the contrary, if the model is too rough will cause the analysis result unstable.

As a result of that, the complexity level of all the electronic components must be decided by the real situation when printed circuit card cloning. If the component model analysis need to carry out or proceed the single bits design, will generally use the model with high preciseness and high complexity level after Printed circuit card cloning, even apply the component simulation way which can be used to solve the semiconductor basic formula.

Two dimensions static value simulation is a representative way since through this way it can help to tackle the current consistency formula with other precise edge terms and geometry parameter, and give out the component electrical features precisely after PCB clone. As for the general electrical analysis, use a simple compact model which can satisfy the relative accuracy model as much as possible.