Clone Printed Circuit Board Schematic File

Clone Printed Circuit Board Schematic File needs to follow some steps

1. Whether the information received in the process is complete (including: schematic diagram, *.brd file, bill of materials, PCB design description and PCB design or change requirements, standardization requirements description, process design description document)

2. Make sure the PCB template is up to date;

3. Confirm that the positioning of all the electronic components position of PCB is correct;

4. Whether the PCB design description and the PCB design or change requirements and standardization requirements are clear;

5. Confirm that the prohibited placement of electronic component and wiring areas on the outline drawing have been reflected on the PCB;

6. Compare the outline drawings to confirm that the dimensions and tolerances marked on the PCB are correct, and that the metallized holes and non-metallized holes are accurately defined;

7. After confirming that the PCB template is accurate, it is best to lock the structural file to avoid mis-operation from being moved when placing the components on it;