Replicate Electronic Printed Circuit Board

Replicate ELECTRONIC PRINTED CIRCUIT BOARD to improve the Switch Performance

Replicate ELECTRONIC PRINTED CIRCUIT BOARD will normally refers to the switch model converter, excellent layout obtain from the ELECTRONIC PRINTED CIRCUIT BOARD Replicate is critical for the acquirement of systematic performance. If the ELECTRONIC PRINTED CIRCUIT BOARD layout is not designed properly, will have below inferior effects:

1 Generate too much noise on the control circuit which could affect the systematic reliability after Replicate ELECTRONIC PRINTED CIRCUIT BOARD;

2 there is too much consumption on the ELECTRONIC PRINTED CIRCUIT BOARD tracks which could affect the efficiency;

3 Generate too much electro-magnetic interference on the system which could affect the compatibility after Replicate ELECTRONIC PRINTED CIRCUIT BOARD;

ZXLD1370 is a multiple topology switch model LED driver controller, each different topology structure will embed the external switch components. This kind of LED driver is suitable for voltage increase and decrease model;

Considering track width after ELECTRONIC PRINTED CIRCUIT BOARD Replicate

As for the switch model power supply track, main switch and related power component load with great current. Those components connecting to tracks should have resistors with the compatible thickness, width and length. The heat generated from track when current go through after Replicate ELECTRONIC PRINTED CIRCUIT BOARD will not only decrease the efficiency, but also increase the temperature on the tracks. So in order to limit the temperature, the track width must be assured to fit the prescribed switch current is quite important.

 

The below formulation has revealed the relationships among temperature and track width after ELECTRONIC PRINTED CIRCUIT BOARD Replicate:


Tags: ,,,,,,,,