Printed PCB Card Cloning Technology

As an Printed PCB Card Cloning Engineer, integrate the most advanced technology into the printed pcb card must be taken into consideration, these advanced technology can present not only on the outstanding product performance, but also the decreasing of the product cost. The most difficult thing is how to apply these technologies into the product. And there are multiple elements must be taken into account.

Printed PCB Card Cloning Technology

Printed PCB Card Cloning Technology

The elements need to be considered includes: product functionalities, design application, product test and if the electro-magnetic interference can comply with the PCB Board requirement. Decreasing the repetition of PCB Board Cloning and design is possible, but it also depends on the completeness of the preliminary stage. most of the times, the issues and problems can easier to be discovered in the later stage of PCB reverse engineering, and more difficult problem is rectify the issue in the process.

However, although most of the designer bear the clear mind of this rules, it is critical to have high level design software with integration;

Below are the decisive elements

A, the interconnection of Schematic Diagram with Printed pcb card Layout;

B, Auto-layout functionality;

C, Precise DRC inspector;

High density interconnect interface;

flexible design;

Embedded source less, negative components;

Radio frequency design;

Automatic script generation;

Topology layout;

Design for fabrication, design for test and design for manufacturing;

Affiliate product can execute the analog simulation, digital simulation, analog/digital hybrid signal simulation, high speed signal simulation and radio frequency simulation in the Printed pcb card Board Cloning;


Tags: ,,,,,,