Connection Lists From Printed Wiring Card Remanufacturing
After completing parts of your layout from the process of Printed wiring card Remanufacturing, you may want to check if all drawn connections match the ones you have in mind or match with original printed circuit board through reverse engineering technique. This is probably best done in conjunction with a Net-list file:
After completing parts of your layout from the process of Printed wiring card Remanufacturing, you may want to check if all drawn connections match the ones you have in mind or match with original printed circuit board through reverse engineering technique
The following examples give more rudimentary ways to examine the connections.
1) create at least two elements and name them
2) create some connections between their pins which is important for high resolution printer pcba cloning
3) optionally add some vias and connections to them
Now select lookup connection from the Connections menu, move the cursor to a pin or via and press any mouse button. PCB will look for all other pins and/or vias connected to the one you have selected and display the objects in a different color for netlist generation in PCB clone service.
Now try some of the reset options available from the same menu. There also is a way to scan all connections of one element. Select a single element from the menu and press any button at the element’s location.
All connections of this element will be saved to the specified file. Either the layout name of the element or its canonical name is used to identify pins depending on the one which is displayed on the screen (may be changed by Display menu).
An automatic scan of all elements is initiated by choosing all elements. It behaves in a similar fashion to scanning a single element except the resource reset after Element is used to determine if connections should be reset before a new element is scanned through PCB card cloning value engineering.
Doing so will produce very long lists because the power lines are rescanned for every element. By default the resource is set to false for this reason. To scan for unconnected pins select unused pins from the same menu.
Tags: remanufacture printed wiring card artwork,remanufacture printed wiring card cad file,remanufacture printed wiring card component list,remanufacture printed wiring card design,remanufacture printed wiring card diagram,remanufacture printed wiring card drawing,remanufacture printed wiring card gerber file,remanufacture printed wiring card layout,remanufacture printed wiring card schematic