Clone Convertor PCB Board

Clone Convertor PCB Board for the two channels signals convertor, from dual polarity input voltage to the dual polarity output current, and there is a very specific requirement, each channel must have a piece of double color LEDs which can flash according to the input signals after clone pcb board, and frequently take red light or green light to indicate the signals as positive or negative separately.

and in this case there will be two problems, first is LED driver will need the rising pressure, as a result of that there will be no dead block where is close to the zero; secondly the engineer can foretell when the signal is negative, LED will probably present the negative result, and vise visa.

And this scenario can be view as the backlash in view of the mechanical force. and normally it is not necessary to take the variable voltage to drive the LED, but apply PWM driver as Linear’s LTC6992, which still need to generate a deviation and still unable to tackle the backlash issue.

besides, engineer will need two pieces of PWM driver for each channel which can probably increase the extra circuit and makes the LED turns from red to green after pcb clone; and a reasonable method will find a proper low level microcontroller.

the supreme court has already proclaimed the business secret or intellectual property obtained from self-research or through clone pcb board don’t belong to the unfair competition action. Circuit Engineering Co.,Ltd has commited to clone technology research and service for over two decades. and have ever regerated pcb board from different industries, as well as the pcb board manufacture and prototype building. and we have great advantage over the pcb board clone cycle control, research and development as well as the cost analysis.

Nowadays, electronic products are being updated in fast speed; and Clone Convertor PCB Board from our company in the base of completely master the traditional PCB structure or its basic circuit, furthermore, is base upon the self research and development, include the software upgrade and product second phase development;

And we will dedicate to clone pcb board with 100% exact the same functions as original sample given by customers.at the same time, we also decrease reverse engineering PCB cycle refers to the pcb board with blind or buried vias, effectively save customer time and energy, low down its cost. and which is also one of the reasons for us to be favor by most of our clients.